Four unlabelled amber glass bottles, including a dropper bottle, on a round wooden tray against natural linen

Why Is My Vape Leaking? How to Fix and Clean Leaking Pods and Tanks

WARNING: Vaping products contain nicotine, a highly addictive chemical. Health Canada

18+ only. This article is for adults 18 years of age and older. Vaping products are not for sale to minors in Alberta or anywhere in Canada. Valid government-issued photo ID is required.

A leaking pod or tank is one of the most common problems adults run into with refillable vaping devices. It wastes liquid, makes a mess of pockets and bags, and can leave nicotine-containing liquid on your hands.

This guide from the VapeLoft team in Edmonton explains why vapes leak, gurgle or spit, how to fix each problem step by step, and how to clean a pod or tank safely. It also covers how Alberta's cold winters and hot summers affect leaks, and when a part simply needs replacing.

Quick Answer: Why Vapes Leak and How to Stop It

Most vape leaks come from a few simple causes: overfilling, a fill port or seal that isn't closed properly, a coil or pod that isn't fully seated, hard draws that flood the coil, or temperature and pressure changes. Wipe the device dry, reseat the parts, fill to the line, and store it upright.

What you notice Most likely cause What to try first
Liquid pooling under the pod or on the contacts Overfilled pod, loose coil or pod not clicked in Remove the pod, wipe both sides dry, reseat it firmly
Liquid coming out of the tank's air holes Flooded coil, worn O-ring or loose base Close the airflow to refill, check the O-rings, tighten finger-tight
Gurgling or crackling sound Liquid sitting in the coil or airflow path Blot the mouthpiece and airflow, take slower, gentler draws
Liquid in your mouth (spitback) Flooded coil or a coil that isn't matched to your liquid Clear the chimney, check the coil's resistance and liquid type
Leaks after a cold walk or a flight Temperature or air pressure change Keep the device upright and at room temperature; don't overfill before travel
Leaks that won't stop Cracked pod, damaged seal or worn coil Replace the pod, coil or tank part

Leaking, Flooding, Gurgling or Spitback: What's the Difference?

Leaking means e-liquid escapes the pod or tank. Flooding means too much liquid has soaked into the coil. Gurgling is the sound a flooded coil or wet airflow makes. Spitback is when small droplets reach the mouthpiece. They often share the same causes, so the fixes overlap.

Leaking

Liquid is escaping the reservoir, usually at the bottom of the pod, on the contacts or around a tank's base.

Flooding

The wick holds more liquid than the coil can vaporize, often after hard draws or poor priming.

Gurgling

A wet, bubbling sound from liquid in the coil or airflow. It often comes just before a leak.

Spitback

Droplets reach the mouthpiece, usually from a flooded coil or a coil not suited to your liquid.

If you're not sure how coils and wicks work, our vape coil guide explains coil types, resistance and priming in plain language.

How to Fix a Pod That's Leaking From the Bottom

A pod leaking from the bottom is usually overfilled, not clicked in fully, or has a loose or damaged coil seal. Remove the pod, wipe the pod base and the device contacts dry, check the fill plug and coil, refill only to the line, and let it sit upright for a few minutes.

Work through these steps in order.

  1. Remove the pod and dry everything. Use a tissue or paper towel to wipe the bottom of the pod and the contacts inside the device. Liquid on the contacts can look like a leak even when the pod is fine.
  2. Check the fill plug. The rubber plug should sit flat and fully closed. A plug with a folded edge is one of the most common causes.
  3. Check the coil. If your pod uses a replaceable coil, push it straight in until it sits flush. Make sure its rubber seal is in place and not twisted.
  4. Look for cracks. Hold the pod up to the light. A cracked pod can't be repaired and needs to be replaced.
  5. Reseat the pod. Click it back in firmly so it sits level in the device.

Pods with built-in coils, such as the UWELL Caliburn G3 replacement pods, can't be repaired once the seal or coil wears out. Replaceable-coil pods, like the Smok Nord 5 empty pods, let you swap just the coil.

Choosing a design that suits how you vape makes a big difference to leaks. Our guide on how to choose a refillable pod system compares fill styles and pod types.

How to Fix a Tank Leaking From the Air Holes

A tank leaking from its air holes usually has a flooded coil, a worn or missing O-ring, a loose base, or was filled with the airflow open. Empty and dry the tank, check every O-ring, tighten parts finger-tight, close the airflow while refilling, and use the wattage range printed on the coil.

Tanks have more seals than pods, and the air holes sit close to the coil, so excess liquid often escapes there.

Step by step

  1. Empty and dry the tank. Take it off the device and blot the base and the device's 510 connection.
  2. Check the O-rings. Look at the rings on the coil, the base and the glass. Replace any that are cracked, flattened or missing. Don't wrap seals in tape.
  3. Tighten gently. Thread the coil and base on finger-tight. Over-tightening can pinch seals, and loose threads let liquid weep.
  4. Close the airflow to refill. On many tanks, closing the airflow ring while you fill helps stop liquid running through the coil.
  5. Match the power to the coil. Use the wattage range printed on the coil. Very low power can leave liquid sitting in a high-capacity coil.

If you use a tank such as the Geekvape Cerberus tank, keep a few spare O-rings and coils on hand. You can compare other options in our vape tanks collection.

How to Fill a Pod or Tank Without Leaks

Fill slowly with the bottle nozzle against the inside wall of the reservoir, not down the centre tube. Stop at the max fill line, leaving a small air gap. Close the fill port fully, wipe away any drips, and let the pod or tank stand upright for a few minutes before using it.

Amber glass dropper bottle standing on linen in front of a round wooden plate in warm light
Photo via Pexels (Pexels License).

Most leaks start at refill time, so a good filling habit prevents the most problems.

  • Aim for the wall. Point the nozzle at the inside wall of the reservoir so liquid doesn't run down the centre airflow tube (the chimney).
  • Stop at the line. Leave a small air gap at the top. A brim-full pod has nowhere for air to go and will push liquid out.
  • Close it fully. Press the plug or cap down until it's flat and secure.
  • Wipe and wait. Wipe off any drips, then stand the pod or tank upright for a few minutes.
  • Prime new coils. Let a new coil soak before you use it. Our coil guide explains priming step by step.

Liquid type matters too. Thinner liquids flow more easily through small pod coils, while thicker liquids suit larger, lower-resistance coils. Our nicotine salt vs freebase guide explains how to match a liquid to your device.

Close the child-resistant cap on the bottle every time.

Coils, Seals and Draw Style

Worn coils, mismatched coils and very hard or long draws are common causes of flooding and spitback. Use a coil that suits your device and liquid, replace it when performance drops, and take steady, gentle draws rather than strong, repeated pulls.

Coils

As a coil ages, its wick can lose its ability to control liquid flow. If leaks start after weeks of use with no other change, the coil may be due for replacement. Our coils and pods collection lists replacements by device.

Draw style

Long, forceful draws on a tight mouth-to-lung pod can pull liquid through the wick faster than it vaporizes. Steady, moderate draws usually reduce gurgling. Follow your device manual for its intended draw style.

Edmonton Cold, Summer Heat and Pressure Changes

Temperature and air pressure changes are a common cause of leaks in Alberta. Cold makes e-liquid thicker and can stop coils from wicking well, while heat thins it and expands the air inside the pod. Keep devices upright, at room temperature, and avoid leaving them in a parked car in any season.

Clear dropper bottle of golden liquid lying on textured linen in warm side light
Photo via Pexels (Pexels License).

Edmonton winters drop well below freezing, and summer cars heat up fast. Both affect e-liquid inside a pod or tank.

Cold weather

Cold liquid gets thick and flows slowly into the coil. That can cause a dry or harsh hit, and some people then draw harder, which floods the coil once it warms up. Bring the device inside and let it reach room temperature before you use or charge it.

Heat

Warm liquid becomes thinner and the air in the reservoir expands, which can push liquid through seals. Don't leave devices or bottles on a dashboard or in a hot vehicle. Our e-liquid shelf life and storage guide covers safe storage temperatures.

Flights and mountain drives

Air pressure changes during a flight or a drive to the Rockies can force liquid out of a full pod. Travelling with a pod that isn't completely full helps. For airline battery rules, see our vape battery safety guide.

How to Clean a Leaky Pod or Tank Safely

Power the device off, remove the pod or tank, and blot away liquid with a tissue or cotton swab. Wipe the battery contacts dry. Tank parts without the coil can be rinsed in warm water and left to dry completely. Never put water inside the battery, and don't rinse a coil you plan to keep using.

Bamboo cotton swabs in a wooden scoop on soft linen, ready for gentle cleaning
Photo via Pexels (Pexels License).

Cleaning is often all it takes to stop a recurring "leak" that is really old liquid on the contacts or in the airflow channel.

Pods

  1. Turn the device off if it has a power button, and remove the pod.
  2. Blot the pod base, the mouthpiece and the device contacts with a tissue or dry cotton swab.
  3. To clear liquid from the airflow, wrap the mouthpiece in a tissue and blow gently through the bottom air hole, away from your face.
  4. Let everything air-dry before reinserting the pod.

Tanks

  1. Empty the tank and remove the coil.
  2. Rinse the glass, chimney and drip tip in warm water. Avoid harsh cleaners, which can damage seals.
  3. Let every part dry completely, ideally overnight, before reassembling.

Tip: Keep a small dry cloth or a few cotton swabs with your refill supplies. A quick wipe of the contacts and pod base every time you refill stops most leaks from building up.

Never run water into the battery section, and don't try to open a sealed device. If liquid has got inside the battery, stop using it and follow the steps in our battery safety guide.

Handling Leaked E-Liquid Safely at Home

E-liquid that contains nicotine is poisonous if swallowed and can be absorbed through the skin. Health Canada advises washing your hands after handling vaping liquid, storing it out of sight and reach of children and pets, and calling 9-1-1 or a Poison Control Centre at 1-844-POISON-X if someone swallows it.

Treat any spill with the same care as the bottle itself.

  • Wash your hands with soap and water after handling a leaking device or cleaning up a spill.
  • Wipe surfaces with a paper towel, then wash the area. Keep children and pets away until it's clean.
  • Dispose of soaked tissues where children and pets can't reach them.
  • Keep devices and bottles out of sight and reach of children and pets, never next to food, drinks or medicine.

Health Canada's vaping product safety page says that if someone has swallowed vaping liquid, seek emergency medical attention or call 9-1-1 or a Poison Control Centre at 1-844-POISON-X (1-844-764-7669).

If you think a vaping device or liquid has a safety defect, you can report it to the retailer, the manufacturer, or Health Canada through its consumer product incident reporting page.

When to Replace Your Pod, Coil or Tank

Replace a pod or tank part when it's cracked, when seals are torn or missing, or when leaks continue after cleaning, reseating and careful filling. Replace a coil when leaks, gurgling or spitback return quickly after a fresh fill. Buy replacements made for your device from a legal Canadian retailer.

Pods and coils are consumable parts, and cleaning can't fix a cracked pod or a worn-out coil.

Signs it's time for a replacement include:

  • A visible crack in the pod, tank glass or chimney.
  • Leaks that return within hours of a careful refill.
  • Constant gurgling or spitback, even with gentle draws.
  • A pod that no longer clicks firmly into the device.

Use parts designed for your device. In Canada, vaping products must meet the Tobacco and Vaping Products Act and the Canada Consumer Product Safety Act. Health Canada also says not to modify vaping products. Our refillable starter kits collection lists the devices we carry.

Before you buy any vaping product in Alberta, check the label and the excise stamp. Our guide to vape excise stamps and legal vaping products shows what to look for. For age and ID rules in Edmonton, see our Alberta vaping laws guide.

Still not sure what's causing a leak? You can contact the VapeLoft team with your device model and we'll help you troubleshoot.

Using a disposable that blinks or won't hit, rather than a leaking refillable? See our guide to disposable vape blinking or not hitting.

Frequently Asked Questions

Why is my vape leaking from the bottom?

The most common causes are overfilling, a fill plug that isn't fully closed, a pod or coil that isn't seated properly, a damaged seal, or a cracked pod. Remove the pod, wipe the pod base and contacts dry, reseat the coil and pod, and refill only to the max line.

Why is my vape gurgling?

Gurgling means liquid is sitting in the coil or airflow channel, usually because the coil is flooded. Blot the mouthpiece and air holes with a tissue, take slower and gentler draws, and check that the pod or tank isn't overfilled.

Why does my vape leak juice into my mouth?

This is called spitback. It usually happens when the coil is flooded or when the coil isn't suited to the liquid you're using. Clear the chimney with a tissue, check the coil's resistance and recommended liquid, and avoid very long, hard draws.

How do I stop my vape pod from leaking?

Fill slowly against the inside wall of the pod, stop at the max line, close the fill port fully, and let the pod stand upright for a few minutes. Keep the device upright and at room temperature, and replace the pod or coil when seals wear out.

How do I clean a leaking vape pod?

Remove the pod and blot the base, mouthpiece and device contacts with a tissue or dry cotton swab. Gently blow through the bottom air hole into a tissue to clear the airflow, then let everything dry before reinserting. Never get water inside the battery.

Can cold weather make my vape leak?

Yes. Cold makes e-liquid thicker, which can lead to harder draws that flood the coil once the liquid warms up. In Edmonton winters, bring devices indoors and let them reach room temperature before using or charging them.

Is leaked e-liquid dangerous?

E-liquid containing nicotine is poisonous if swallowed and can be absorbed through the skin. Wash your hands after contact, clean spills promptly, and keep liquids away from children and pets. If someone swallows it, call 9-1-1 or a Poison Control Centre at 1-844-POISON-X (1-844-764-7669).

When should I replace a leaking pod or coil?

Replace it when the pod or tank is cracked, seals are torn or missing, or leaks, gurgling or spitback keep returning after cleaning, reseating and careful refilling. Use replacement parts designed for your device.

Sources

Last reviewed: November 2, 2026


18+ only. VapeLoft sells vaping products only to adults 18+ with age verification. This article is for general information only. It is not medical or legal advice, and it doesn't replace your device manufacturer's instructions.

WARNING: Vaping products contain nicotine, a highly addictive chemical. Health Canada

Share:

More guides

Keep reading — more plain-language guides from the VapeLoft team.

Refillable vape box mod with a glass tank on a warm wooden table

What's the difference between nicotine salt and freebase e-liquid? This guide covers the chemistry, typical Canadian strengths, Canada's 20 mg/mL...

Alberta Legislature Building in Edmonton at sunset, seat of the Legislative Assembly that passes Alberta's vaping laws

A plain-language 2026 guide to Alberta's vaping laws for adults in Edmonton. It covers the 18+ age limit, the under-25...

Unlabelled amber glass dropper bottle on a warm beige surface beside a smooth stone

Why is your disposable vape blinking or not hitting? A calm Canadian guide for adults 18+ to what the blinking...

Clear glass dropper bottle of golden liquid on a natural wood slice in soft warm light

How to tell if a vaping product is legal in Canada: a guide for adults 18+ to Alberta's vaping excise...

Row of amber glass dropper bottles on a dark wooden shelf, out of direct light

How long does e-liquid last? A Canadian guide for adults 18+ to e-liquid shelf life, reading the date and label...

Close-up of the metal terminals of several cylindrical batteries

A Canadian guide to vape battery safety for adults 18+: handling 18650 and 21700 cells, safe charging, storage, Edmonton winter...